Most people only notice TV cables when there are too many of them.
New TV.
Soundbar.
A couple of consoles.
Wi-Fi router.
Maybe a streaming box or two.
One day you look behind the TV stand and there’s a knot of wires. You mean to “deal with it later”, but later never comes.
The good news: you don’t need a remodel or expensive furniture to fix it. A mix of simple steps — plus help from a TV mounting service in Los Angeles when it gets tricky — is usually enough to turn a messy media wall into a clean, modern setup.
In this guide we’ll go through:
- what to do yourself,
- when it makes sense to call a pro,
- and how companies like UrbanOrbits approach TV mounting and cable management in Los Angeles.
You can learn more about UrbanOrbits on their website: https://urban-orbits.com/
And see all their services here: https://urban-orbits.com/services
Why cable management matters more than it looks
Messy cables feel like a small problem, but they affect a lot:
- Visual noise – A tangle of wires makes even a nice TV and furniture look cheaper.
- Cleaning – Dust builds up around cables and behind power strips.
- Safety – Loose cords are easy to trip on. Pets and kids like to play with them.
- Tech issues – Tight or twisted cables can damage ports, and it’s harder to find what went wrong when something stops working.
Good cable management does the opposite:
- the wall looks clean and intentional,
- the floor area is easier to vacuum and mop,
- devices are safer,
- you can add or remove equipment without crawling through a nest of wires.
That’s why a solid TV mounting service in Los Angeles almost always includes cable management, not just drilling holes and hanging a screen.
Step 1: Remove what you don’t use
Start with the simplest win: get rid of extra gear.
Pull the TV stand a bit forward and look at what’s actually connected:
- Are there old consoles you never turn on?
- Is a DVD or Blu-ray player still plugged in “just in case”?
- Do you have two streaming boxes but only use one?
- Are there power strips feeding other power strips?
Unplug and remove anything you don’t use. Throw away dead cables. If you aren’t sure what a cable does and everything still works after you unplug it, you probably don’t need it.
Less gear = fewer cables to manage.
Step 2: Group and label the cables you keep
Now work with what’s left.
Around a typical TV you’ll see a few basic cable types:
- Power – for TV, soundbar, consoles, streaming devices.
- HDMI / audio – between TV, soundbar, receiver, and consoles.
- Network – Ethernet lines from your router.
- Signal – antenna or cable TV lines, if you use them.
You don’t need fancy tools. A small kit is enough:
- Velcro ties,
- reusable cable ties,
- simple labels or tape and a marker.
Group cables by function and route. Label both ends of important ones:
- “TV HDMI 1”,
- “Soundbar”,
- “Console 1”,
- “Apple TV”.
You’ll save yourself a lot of guessing later.
Step 3: Lift cables off the floor
Cables on the floor always look worse than they are.
A few quick fixes:
- Stick small cable clips along the back edge of your TV stand or cabinet.
- Use the built-in cable holes in the furniture instead of draping wires over the side.
- Add a cable tray under the stand or behind a desk to hold power strips and extra slack.
- Run cables tightly along the wall instead of letting them sag in the air.
The goal isn’t “perfectly invisible”. The goal is simple: no random loops on the floor and no big tangles in one spot.
Step 4: Combine cable management with a wall-mounted TV
If your TV still sits on a stand, the biggest visual upgrade you can make is to put it on the wall.
When you pair that with good cable routing, the difference is huge:
- the TV becomes a clean focal point,
- the floor feels more open,
- there’s less furniture for cables to wrap around.
This is where many people in LA turn to a TV mounting service in Los Angeles instead of doing it alone. A company like UrbanOrbits doesn’t just install a bracket. They:
- find studs or use the right anchors for your wall,
- suggest a good height based on your sofa and viewing distance,
- choose the right type of mount (fixed, tilt, full-motion),
- plan how to hide or guide the cables.
Sometimes that means simple on-wall raceways painted to match the wall. Sometimes it means more advanced in-wall routing, where code and wall type allow it.
You can see how UrbanOrbits approaches TV mounting and cable management here:
https://urban-orbits.com/services
Step 5: Plan for soundbars, speakers, and consoles
Most “TV corners” are actually small home theaters now:
- soundbar or speakers,
- one or two consoles,
- streaming devices,
- sometimes a receiver.
If you only clean up the TV cables, the cabinet below still looks messy.
A better plan:
- Mount the soundbar directly under the TV and route its power and audio cables alongside the TV cables.
- Put consoles in a cabinet with a hole in the back for cables and enough space for airflow.
- Decide where the router and modem live, then route their cables cleanly to the TV zone or keep them in a separate, tidy spot.
A professional installer will ask a few questions:
- How often do you game?
- Do you use multiple streaming platforms?
- Do you prefer a minimalist look or easy access to all devices?
A good TV mounting service in Los Angeles then builds the cable plan around your actual habits, not a generic diagram.
Step 6: Hide the power strip without burying it
Everyone wants to hide the power strip. The mistake is hiding it so well you can’t reach it.
A simple setup that works:
- Mount the power strip on the back of the TV stand or inside the cabinet.
- Keep the main power cord loose enough so you can move the stand a little if you need access.
- After you plug everything in, take one clear photo of the strip and labels.
From the front you don’t see the strip or any dangling cords, but if a breaker flips or a device dies, you can reach everything in seconds.
Step 7: When DIY is enough — and when to call a pro
There’s a lot you can fix by yourself in one evening:
- removing extra devices,
- grouping and tying cables,
- adding a few clips and a tray,
- tidying around the TV stand.
But some things are easier and safer with help:
- mounting a large TV on the wall,
- hiding cables when you’re not sure what’s inside the wall,
- putting a TV above a fireplace,
- building a full media wall with soundbar, console, and speakers,
- doing all of this in a rental where you don’t want to risk damage.
That’s the point where calling a TV mounting service in Los Angeles makes sense.
UrbanOrbits, for example, focuses on:
- TV mounting and re-mounting,
- cable management and wire concealment,
- soundbar and audio integration,
- home theater and media wall setups across Los Angeles.
You can explore their full list of services here:
https://urban-orbits.com/services
And read more about the company on the main site:
https://urban-orbits.com/
Final thoughts
Picture a normal evening.
You sit down on the sofa, turn on the TV, and for a moment you see not the show, but the corner itself: a screen, a stand, a cluster of boxes, and a mess of cables you’ve been “meaning to fix”. Everything works, but it still feels unfinished.
Cleaning this up isn’t about building a showroom or copying a designer photo from Pinterest. It’s about a few clear decisions you make once:
- which devices stay,
- where they live,
- how the cables run between them.
Some of that is easy to handle on your own with a pack of cable ties and an hour of focus. And if you want to go further — a wall-mounted TV, hidden wires, and a media wall that actually looks intentional — it’s faster to bring in people who do this every day.
That’s where a focused TV mounting service in Los Angeles like UrbanOrbits earns its fee. They come in, measure the room, mount the TV, tame the cables, and leave you with a setup you don’t have to think about again.
Next time you hit the remote, you’ll see the movie, not the wires. And that’s the whole point.